中文
+ 更多 联系我们
联系我们

苏州威旻达机械设备有限公司

联系人:王经理

手机:15906136866

电话:0512-68136800

传真:0512-68136800

地址:苏州市吴中区吴中大道5399号 

公司新闻

铝型材切割机与型材切割机能通用吗?

2018-08-09 点击数:213
铝型材切割机从名字是可以看出,这是一款切割铝的设备,铝由于不易生锈、质量轻、易加工被广泛应用于门窗户、幕墙、散热器、各种裱框等,因此对切割加工工艺要求特别高,而铝型材切割机的切割精度可达0.01mm。对铝型材切割机锯片的要求也是相当高,铝型材切割机锯片一般采用镶硬质合金刀粒,锯片主轴转速2000-5000转,铝材切割机作用对像是切割铝棒、铝板、铝管、铝异型材.切割机用途很大的,但是如果将此精密设备来切割其他型材如铁、不锈钢、这些高硬度的材料,不划算、不经济,
Aluminum cutting machine can be seen from the name, this is an aluminum cutting equipment, aluminum because it is not easy to rust, light, easy to process is widely used in the door window, curtain wall, radiator, various framed and so on, so the cutting process requirements are very high, and the cutting precision of the aluminum profile cutting machine can reach 0.01mm. The requirements for the cutting machine of aluminum profile cutting machine are also very high. The blade of the aluminum profile cutting machine generally uses a hard alloy knife and 2000-5000 rotation of the spindle speed of the saw blade. The function of the aluminum cutting machine is like cutting aluminum bar, aluminum plate, aluminum tube and aluminum profile. The cutting machine is very useful, but if this precision equipment is used to cut the other sections, the cutting machine is used. Such as iron, stainless steel, these high hardness materials, not cost-effective, uneconomical,

铝型材切割机价格相对于型材切割机来说高了很多,一台气动半自动铝型材切割机一般价值0.8-1.5万左右,而一台型材切割机只需几百上千元便可以,型材切割机属于粗加工,它的功能是只需将一些型材切下来便可,无需对精度、和光滑度负责,而铝型材切割机切出的铝型材必须要求表面光滑、精度也要求十分精细,所以二者最好不要共用

铝切割设备

The price of the aluminum profile cutting machine is much higher than that of the profile cutting machine. A pneumatic semi-automatic cutting machine is worth about 0.8-1.5 ten thousand, and a section cutting machine is only a few hundred thousand yuan. The cutting machine is a rough machining. The function of the cutting machine is only to cut some profiles off, without the precision of the precision. And the smoothness is responsible, and the aluminum profile cutting machine must require smooth surface and precision, so the two should not share it.
再者铝型材由于材质原因,在切割过程中刀片高速旋转,会产生热量,而铝材质软容易被热刀片熔化,所以在铝型材切割机上装有切屑油,这不仅起到润滑刀片的作用,还有冷却刀片的作用,所以价格上比起来也是相差大
Moreover, because of the material reason of the aluminum profile, the blade will rotate rapidly during the cutting process, which produces heat, and the aluminum material is easy to be melted by the hot blade, so the cutting oil is installed on the cutting machine of the aluminum profile, which not only plays the role of lubricating blade, but also the role of the cooling blade, which is also different in price.
通过以上,大家应该明白为什么铝型材切割机和型材切割机不能共用了吧。因为型材切割机不能当铝材切割机使用,原因是型材切割机的角度尺不精确,在切钢铁型材时,切出的型材角度即使有较大的误差,较大的接缝在焊接时可以用焊条弥补。但型材切割机切铝材时,如果切出的铝材角度误差较大时,铝材对接后就会出现较大的缝隙,这缝隙用紧固件是无法弥合的。
Through the above, we should understand why aluminum profiles cutting machine and profiles cutting machine can not share it. Because the cutting machine can not be used as an aluminum cutting machine, the reason is that the angle ruler of the section cutting machine is not accurate. When cutting the steel section, the section angle of the section has large error, and the larger joint can be made up with welding rod when welding. But when cutting the aluminum material of the cutting machine, if the angle error of the aluminum material cut out is large, the aluminum material will appear large gap after docking. This gap can not be bridged with the fastener.
以上的精彩内容由铝切割设备分享,更多的精彩内容请点击进入我们的官方网站:/
The above highlights are shared by aluminum cutting equipment. For more highlights, please visit our official website: /
友情链接:金巴黎彩票  58彩票官网  菠萝彩票  鸿运彩票注册  凤凰娱乐  金巴黎彩票  568彩票官网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!